Shaped sections allow to route cable ways of any complexity and configuration.
To ensure corrosion protection, the following types of coating are applied:
- SZ – preliminary galvanizing using Sendzimir process, with class Z140 or higher (as per GOST R 52246-2016)
- SZ270 – preliminary galvanizing using Sendzimir process, with class Z275 or higher (as per GOST R 52246-2016)
- RAL – polymeric powder coating of a steel product preliminary galvanized using Sendzimir process, with class Z140 or higher (as per GOST R 52246-2016)
- HDZ – hot-dip galvanizing of a finished product (as per GOST 9.307-89)
- INOX – stainless steel (AISI304)
- INOX316 – stainless steel (AISI316)
For cover attachment to cable ladders, PSKR hold-down clamps are used. Standard connector for this product line is SLSTK.
Turning section radius is 490 mm, which allows for cable routing with required bending radius.
Standard section dimensions:
- Bottom width of 150 to 1000 mm
- Height of 100 / 125 / 150 / 175 mm
- Turning angle of 30 / 45/ 60/ 90 deg.
- Turning radius of 500 / 600 / 900 mm
- Side rail thickness of 1.5 / 2.0 / 2.5 mm
