Simple shaped sections and their covers

Simple shaped sections are used for cables with small minimum bend radius value.
To ensure corrosion protection, the following types of coating are applied:

• SZ – preliminary galvanizing using Sendzimir process, with class Z140 or higher (as per GOST R 52246-2016)
• SZ270 – preliminary galvanizing using Sendzimir process, with class Z275 or higher (as per GOST R 52246-2016)
• RAL – polymeric powder coating of a steel product preliminary galvanized using Sendzimir process, with class Z140 or higher (as per GOST R 52246-2016)
• HDZ – hot-dip galvanizing of a finished product (as per GOST 9.307-89)
• INOX – stainless steel (AISI304)
• INOX316 – stainless steel (AISI316)

Standard section dimensions:

• Width of 50 to 200 mm;
• Wall height of 50 to 800 mm;
• Thickness of 0.7 / 1.0 mm.

For HDZ design version, all shaped sections have standard thickness of 1.0 mm.

For all products of this line, the cover is attached to the cable tray by tight locking.

Cable trays and shaped sections are connected with each other by connectors, such as SUT or SLB.